How can I transfer Symantec Endpoint Protection Manager to a different machine?

Contents show

How can I switch the server where Symantec Endpoint Protection Manager is installed?

Make preparations on the new server for the SEPM and the DB. Install SQL from scratch and then. Install a replication site of the SEPM server so that it can connect to the new database. Next, change the management server list in the existing SEPM server so that priority 2 is given to it. Finally, add the new SEPM server IP address. Once all of the clients have updated their policies to correspond with priority 2 of the newly…

What’s the procedure for reinstalling Symantec Endpoint Protection Manager?

To reinstall the management server

  1. The current management server should be removed.
  2. Utilize the installation file to install the server. Symantec Endpoint Protection Manager installation
  3. Make sure that the Welcome panel’s.
  4. Each panel’s instructions should be followed. In most situations, the default settings are adequate.

For Symantec Endpoint Protection Manager, how do I modify my IP address?

When you are in Management Servers, click the Add button on the right, and then select New Server. In this field, you may enter the new IP address that will be used for the SEPM server. After confirming that the HTTP or HTTPS port that is being used for the new IP that is being added is the same as the port that was previously used for the old IP in the Management Server List, click the OK button to add the new IP.

How do I backup and restore the Symantec Endpoint Protection Manager SQL database before moving it to a new SQL server?

Back up and restore the database:

  1. Launch the current server’s instance of SQL Server Management Studio.
  2. Select Tasks > Back Up by performing a right-click on the sem5 database.
  3. To the new SQL server, copy the backup file.
  4. For the new server, launch SQL Server Management Studio.
  5. Restore Database can be accessed by right-clicking Databases in the server tree.

How can I make a Symantec Endpoint Protection Manager backup and restore?

To back up the database and logs

  1. Click the Start button on the computer where Symantec Endpoint Protection Manager is installed.
  2. Click in the dialog box titled “Database Back Up and Restore.”
  3. a backup database.
  4. OK, click.
  5. Click once the database backup is finished. Exit.
  6. Transfer the database backup file to a different computer.
IT IS IMPORTANT:  How can I update my Avast Premium security?

Describe SEPM server.

Anti-malware, intrusion prevention, and firewall capabilities are all included in the Symantec Endpoint Protection software package. This suite was created by Broadcom Inc. and is designed for use on server and desktop PCs. It dominates the endpoint security industry and has the biggest market share of any product.

How can Symantec Endpoint Protection Manager be turned off?

Disabling Symantec Endpoint Protection

  1. Go to the Start menu by navigating.
  2. Enter Run or Win R in the search box.
  3. Enter “Smc -stop” in the Run menu, then click Ok.
  4. Now Symantec Endpoint Protection ought to be turned off.

What version of Sepm do I have, and how do I know?

You should be able to find the version by going to the Control Panel, selecting SEPM, and then clicking on the button that says “for more options.”

In Symantec Endpoint Protection Manager, how do I allow a port?

Solution

  1. Select Endpoint Protection in the left navigation pane when you open the Policies tab.
  2. Click Add Rule under Network Protection – Expand Firewall Rules.
  3. Name the rule as desired, set the rule parameters, and enable any necessary communication in the dialog box that appears.

How can I add a specific IP address to Symantec Endpoint Protection Manager’s whitelist?

Please ensure that you are logged in to the Symantec Endpoint Protection Manager (SEPM) console. Go to the Policies menu and select the Intrusion Prevention option. Click the Edit the policy button once you have chosen the Intrusion Prevention policy that needs to be updated. Select the ID or IDs you want to add to the exceptions list by selecting Exceptions > Add from the menu.

How can I use a BAK file to restore a database?

Restore the database using a backup file known as a BAK.

In the left navigation pane, right-click on the database server, select Tasks, and then select the Restore option. In the To database list box, the name of the database that is being restored is displayed. Simply put the name of the new database you want to create into the corresponding list box. Select ‘From device’.

How do I upgrade an existing SQL database?

Login to Microsoft SQL Server Management Studio. Right click on the DB that you want the data moved to (Ex: adap_new). Select Tasks –> Import Data.

2. MS SQL DB Migration using Import Data Method

  1. Client Name.
  2. Authentication (Used to login to SSMS) (Used to login to SSMS).
  3. Database.
  4. Choose Next.

What distinguishes Symantec Endpoint Protection from antivirus software?

1. Endpoint Security software guards the network and all of its endpoints against a wide variety of dangers. Antivirus software shields an individual system or device from the myriad of malicious behaviors that may be carried out by malware.

What exactly does SEPM mean?

SEPM

Acronym Definition
SEPM Software Engineering Process Management
SEPM Special Emphasis Program Manager
SEPM Scanning Electrical Potential Microscopy
SEPM System Engineering and Program Management

When some Symantec services are stopped, Symantec Endpoint Protection cannot open. How do you fix this?

To restart the Symantec Embedded database service, navigate to the service’s location, right-click on it, and then choose Restart. (Sometimes the service falls into halting mode. In this case, you should try to stop the process (dbsrv9.exe) and in SEPM 12.1 (dbsrv11.exe) from “Task Manager” This will cause the service for the embedded database to automatically resume.

How do I fix Symantec Endpoint Protection problems?

The Symantec Diagnostic Tool, often known as SymDiag, may be downloaded into your computer and then executed in order to determine whether or not it is ready for installation. Help is accessible on both the management server and the client while using the tool, which may be found on the Symantec Support website. Check out this guide for help diagnosing and fixing computer problems with the Symantec Diagnostic Tool (SymDiag)

Without a password, how do I uninstall Symantec Endpoint Protection?

2. RE: How to uninstall symantec endpoint protection 12.1 client version without password

  1. Activate the registry.
  2. Locate Symantec Endpoint Protection SMC under HKEY LOCAL MACHINE/SOFTWARESymantec.
  3. SmcGuiHasPassword’s value should be changed from 1 to 0.
  4. SMC service restart.

How do I use a password to disable Symantec Endpoint Protection service?

Put a halt to the service Protection for Endpoints Provided by Symantec (SEP)

Launch the application. To turn off the service, execute the command smc -stop and then run it again. The notification requesting the password will display.

How can I tell if my Symantec is current?

To check that Symantec Endpoint Protection Manager has the latest content

  1. to verify that. The most recent content is found in Symantec Endpoint Protection Manager.
  2. Click in the console. Home. .
  3. Compare the dates for in the Windows Definitions section of the Endpoint Status group box.
  4. Click if the dates don’t line up. Admin. >
  5. Click the Tasks section.
IT IS IMPORTANT:  What are the problems with child protection?

How can I tell if Windows is using Symantec?

Windows 10 with all of its variants (1903,1909, 20H2)

You may find Symantec Endpoint Protection by clicking the Windows logo in the bottom left corner of the screen and then scrolling along the left column. Launching the program may also be accomplished by clicking on the shield that is located in the bottom right corner next to the temperature.

How can I modify Symantec Endpoint Protection Manager’s port 8443?

To access the Management Server Configuration Wizard, navigate to the Start menu, then choose Programs, followed by Symantec Endpoint Protection Manager. Choose to Reconfigure the Management Server, and then replace the default port number of 8443 with one that is open.

How can I modify the firewall on my Symantec Endpoint Protection?

To modify the firewall rules or settings

  1. Firewall Rules, which enable or disable the default rule.
  2. Choose Firewall Rules. to add a personalized firewall rule. See: Inserting a unique firewall rule. Endpoint Security by Symantec.
  3. , choose. Display advanced. and toggle the setting on or off.

What is SQL in a.BAK file?

On your hard disk, you may create a single file that will save a backup of all of your MS SQL databases. You may restore database backups with Microsoft SQL Server by using these backup files, which all have names that conclude with the “. bak” file extension.

A BAK file needs to be extracted from my computer.

Quick Navigation: How to Open Bak File

  1. Excel to SQL.bak conversion Find the SQL.bak file on your local drive and open it. copy it, then save it.
  2. Bring back.
  3. To SQL Server, BAK. Launch SSMS (SQL Server Management Studio). simply right-click the database.
  4. Use the Excel Convert Tool for.BAK.

How can I get my database back?

To restore a database, right-click the Databases link in the left navigation bar, then click the Restore Database button. Click the button labeled with three dots located in the Source section, then choose Device from the drop-down menu. When the pop-up box appears, click the Add button and go to the location of your backup file. Select the OK button.

How do I transfer a database between servers?

There are several ways to copy a database:

  1. Making use of the Copy Database Wizard. The Copy Database Wizard allows you to upgrade an existing SQL Server database to a newer version as well as copy databases between servers.
  2. restoring a backup database.
  3. releasing databases using the Generate Scripts Wizard.

How can I transfer SQL Server between computers?

Migration Considerations

  1. assemble a new server. The old server’s disk configuration should be used to create the new one.
  2. the new system databases be moved. If you did not create them there during installation, move the new system databases to the location where you want them to live in the future.
  3. Make new logins.
  4. Script it out.

What is the difference between Upgrade and migration in SQL Server?

To update to version 11.7 you can either do an in-place upgrade or a migration.

Differences between in-place upgrade and migration.

Version of Information Server Is in-place upgrade available? Is migration available?
11.3 Yes (recommended). In-place upgrade to 11.5 and then in-place upgrade to 11.7. Yes
9.1 Not supported Yes

How do I start Symantec from command prompt?

Resolution. You should use the commands “smc -stop” and “smc -start” rather than “start smc -stop” and “start smc -start” respectively. The “start” command at a CMD prompt will utilize the “App Paths” key located in the Windows registry in order to locate the smc executable.

How do I disable GREY Symantec Endpoint Protection?

Regarding the inability to disable Symantec endpoint protection:

There is a checkbox to enable or disable the firewall by going to Change Settings >> Configure Settings and selecting the Firewall tab under the Network and Host Exploit Mitigation section.

Is Symantec Endpoint Protection compatible with Windows 10?

Students, professors, and staff at Case Western Reserve University who use Windows PCs can now take advantage of a free download of Symantec Endpoint Protection version 12.1. 6 from the Software Center. This most recent version is compatible with Windows 10, the most recent version of Microsoft’s operating system.

Can Symantec detect ransomware?

Send the malicious email or executable to Symantec Security Response if you are able to identify it. With the help of these samples, Symantec is able to generate new signatures and further strengthen its defenses against ransomware.

IT IS IMPORTANT:  What do companies need in terms of security?

Does Symantec Endpoint Protection include antivirus?

Symantec Endpoint Security: A Brief Overview

Antivirus, antispyware, and a firewall are the core components that provide protection against internet threats and hackers for computers such laptops, desktops, and file servers. Additionally, the solution examines downloaded files and apps for the presence of possible dangers, therefore preventing employees from inadvertently starting assaults.

How do I run LiveUpdate Symantec Endpoint Protection Manager?

You can also run LiveUpdate manually whenever you want.

  1. the Symantec Endpoint Protection Manager interface should be opened.
  2. Use your username and password to log in.
  3. To download live update content, select “Admin | Servers | Local Site | Download LiveUpdate Content.”
  4. In the pop-up dialog box, select “Yes”
  5. When the download is done, click “Close”

How do I uninstall LiveUpdate?

To delete LiveUpdate from your computer, open the “add/remove programs” menu and check the box next to LiveUpdate. You will receive a cautionary notice that states “It has come to our attention that you continue to make use of some Veritas software that is registered with LiveUpdate. It is not recommended that you delete LiveUpdate unless you have first removed all Veritas apps on your computer.”

How do I restart Symantec Endpoint Protection?

Type smc -stop

  1. Select Start.
  2. Press Run.
  3. Punch in smc -start.

How do I get SymDiag logs?

To collect SymDiag Logs for Symantec Support:

  1. Download SymDiag, then launch it.
  2. SymDiag first checks the version status with Symantec when it is launched.
  3. Select the product(s) for which you need to collect the data in the dialog that appears by clicking Collect data for support on the Home screen.

How do I use Symantec Intelligent Updater?

Update virus definitions with Intelligent Updater

Download the proper definition set depending on the version of Windows that you use and the Norton package that you have. You should save the file to the desktop of your Windows computer. Double-clicking the file that you downloaded to the desktop will open it. To proceed, click Yes in the box that displays the Intelligent Updater.

How do I uninstall Symantec Endpoint Protection from PowerShell?

To uninstall using PowerShell

  1. PowerShell should be launched in administrator mode.
  2. Use the (Get-WmiObject -Class Win32 Product -Filter) command. ComputerName. “Name=’Symantec Endpoint Protection'”). Uninstall() returns a message that concludes with “ReturnValue: 0” if the uninstall was successful.

How do I uninstall Sep mobile?

Disabling the device Administrator permission for the SEP Mobile app on an Android device is the first step in uninstalling the SEP Mobile app from an Android device. After that, remove the program as you would any other typical software: Go to Settings > Security > Device administrators. Remove the checkmark from the appropriate device admin settings, then hit the Deactivate button.

How do I download CleanWipe?

To download software:

  1. View Download the most recent Symantec software version.
  2. Download Symantec Endpoint Protection’s complete installation file.
  3. To extract the installation file’s contents, double click on it.
  4. Navigate to the following folder in the folder where you extracted the file: ToolsCleanWipe
  5. Download CleanWipe.

How do I disable Symantec Endpoint Protection Firewall?

Turning off the firewall policy on a client

Connect to the Symantec Endpoint Protection Manager using the appropriate credentials (SEPM). Double-click the Firewall policy that is being utilized by the clients you want to disable the firewall on, then navigate to the Policies menu and choose Firewall. Deactivate this policy by unchecking the box. To save the modifications to the policy, click the OK button.

How do I disable System Center Endpoint Protection?

To accomplish this, locate the icon for System Center Endpoint Protection for Mac in the menu bar, click it, and then select Open System Center 2012 Endpoint Protection from the drop-down menu that appears. Click the button labeled “Activate advanced mode.” To off your antivirus and spyware protection, navigate to the Setup menu, then select Antivirus and Antispyware. When asked, click the Disable button that appears in the pop-up window.

How do I install Symantec Endpoint Protection Manager?

Symantec Endpoint Protection Quick Start Guide Last Updated August 25, 2022

  1. Step 1 is to download.
  2. Install Symantec Endpoint Protection Manager in step two.
  3. Activate your license and add a group in step three.
  4. Installing the Symantec Endpoint Protection clients is step four.
  5. Step 5: Verify the installation of the most recent definitions.