Requirements for Safeguards
These are the minimum general requirements that machine safeguards need to fulfill: Prevent contact: The safeguard must prevent hands, arms, or any other part of a worker’s body from coming into contact with dangerous moving parts. Be secure: Workers should not be able to easily remove or tamper with the safeguard.
What conditions must effective safeguards meet?
Requirements of effective safeguards (Rule 1200)
- Must avoid making contact. Human contact with any potentially harmful machine component should be safeguarded against.
- must be strong and secure.
- Protection from flying objects is required.
- must not introduce new dangers.
- Must not cause disruption.
- must permit secure upkeep.
Except for which of the following machine safety requirements?
The following are the standards for the safeguarding of machines, with one exception: it is required that employees not be able to lubricate a machine without first removing the safeguard.
What are the main three places where machine guarding is required?
Electronic Tool for Machine Guarding
Every machine has three primary components that make it work: the point of operation, the device that transmits electricity, and the controls that operate the machine.
Which five types of machine safeguards are there?
Five General Classifications of Machine Safeguards
- Guards. Guards are physical obstacles that bar entry to machines’ hazardous areas.
- Devices. A safety device can serve a number of purposes.
- Location/Distance.
- Possible techniques for feeding and ejecting.
- Aids of various kinds.
How is a machine protected?
Guards, for example, should have their edges rolled or fastened in such a manner that they eliminate sharp edges. Machine guards should not hinder the operator’s vision. Guards should also allow for lubrication to be performed while the guard is still in place, if at all feasible.
Which four types of machine guards are there?
There are four general types of guards:
- Fixed.
- Interlocked.
- Adjustable.
- Self-adjusting.
Which of the following machine components quizlet always needs guards?
Any part of a power transmission equipment that is less than seven feet from the ground or a working platform is required to have a guard around it. This includes the shafting, flywheels, pulleys, belts, and chain drives.
Which of the following are NSC safeguard requirements?
NSC criteria for safeguards include: “Prevent contact.” Safeguards are required to keep people from coming into touch with potentially hazardous components of machines. Be safe and long-lasting, so that employees won’t be able to render them ineffective by tampering with them or breaking them. Strong enough to endure the rigorous conditions of the working environment.
What constitutes any safeguarding system’s essential component?
Protect the operator from coming into physical touch with potentially hazardous moving components by preventing the operator’s hands, arms, and any other part of their body from coming into contact with these parts. When there is enough protection in place, there is no chance that the operator or any other worker will put any portion of their body in close proximity to potentially dangerous moving parts.
Which two types of machine guarding are most common?
The term “fixed guard” refers to the kind of machine guard that is most frequently seen. Interlocking security measures
Does OSHA mandate machine guarding training?
Guards are required to be installed on any machinery that might put an employee in danger of being hurt. A point of operation is the region of a machine at which it conducts work on a material, such as cutting, shaping, boring, or forming. This region may also be referred to as the working area.
What must a safety measure do to shield workers from mechanical risks?
What functions does a safeguard need to perform in order to protect employees from mechanical hazards? These minimal general standards must be met by safeguards in order for them to be considered adequate. Prevent touch: The safeguard must prevent hands, arms, and any other part of a worker’s body from coming into contact with dangerous moving parts.
What are the three main components of a machine, as defined by OSHA?
Terms in this set (22)
- the operation’s center,
- the mechanism for transmitting power, and.
- the controls that operate.
Which four precautions need to be in place?
The Physical Safeguards section of the Security Rule is there to define how the protected health information (PHI) contained on physical mediums should be protected. The Facility Access Controls, Workstation Use, Workstation Security, and Devices and Media Controls are the four different standards that are included in the Physical Safeguards.
What are the three measures put in place to protect patient data?
The legislation mandates that health care providers, plans, and other organizations protect the confidentiality, privacy, and security of their patients, and it asks for three different types of safeguards: administrative, physical, and technical.
OSHA quizlet: What are Bloodborne Pathogens?
Infectious germs that are conveyed by blood and have the potential to cause disease in people are referred to as bloodborne pathogens.
A needle safety device: what is it?
A safety syringe is a syringe that has a built-in safety mechanism to limit the risk of needlestick injuries to healthcare professionals and others. These injuries can occur when a person accidentally sticks themselves with a needle. A safety syringe may have a needle that is either detachable or permanently linked to the device. On certain types, a sheath is placed over the needle, while on others, the needle retracts into the barrel when the device is not in use.
What types of guards are there according to OSHA’s quizlet?
Die-enclosure guards, fixed-barrier guards, interlocked-barrier guards, and adjustable-barrier guards are the many types of guards available.
Who is in charge of workplace safety according to OSHA quizlet?
OSHA does not issue citations to employees for infractions; instead, the agency holds employers accountable for the safety and health conditions in the workplace. On the other hand, the Occupational Safety and Health Act specifies in Section 5(b) that it is the employee’s responsibility to comply with occupational safety and health standards as well as any and all applicable rules, regulations, and directions.
What different types of temporary protections are there in construction?
Temporary storage of valuable equipment should be stored in sprinklered areas of the building, if possible.
Building Safeguards During Construction.
| Peril | Number of Occurrences |
|---|---|
| Sprinkler Leakage | 83 |
| Riot & Civil Commotion | 72 |
| Escaped Liquids Damage | 40 |
| Surface Water | 25 |
Does yellow have to be used for machine guarding?
To restate what is stated in the standard, “yellow is used to identify physical hazards.” If the guard of a machine does not provide a physical hazard, including but not limited to tripping, falling, being struck by, or being caught-between, then there is no need for color-coding.
What OSHA regulation specifies the general requirements for machine guarding?
General Requirements for all Machines, as outlined in 29 CFR 1910.212.
Which four types of machine guards are there?
There are four general types of guards:
- Fixed.
- Interlocked.
- Adjustable.
- Self-adjusting.
Which of the following is a technical safeguard example?
Information system security is often what people mean when they talk about “technical safeguards.” A few examples include the fact that several degrees of computer security are in place to distinguish between activities such as reading and editing reports. Systems that monitor and audit personnel who access or modify protected health information (PHI).
What is required by the security rule?
In order to maintain the confidentiality of electronic protected health information while also ensuring its integrity and safety, the Security Rule mandates the implementation of suitable administrative, physical, and technical protections.
What are technological protections?
Access controls, data while it is in motion, and data while it is at rest are some of the needs that are addressed by the technical safeguards that are outlined in HIPAA. A covered entity is required to implement technical policies and procedures for computing systems that maintain PHI data in order to restrict access to only those individuals who have been granted access rights. These policies and procedures must be specific to the type of data that is being maintained.
What are included in the security Rule quizlet’s definition of a technical safeguard?
a) Administrative activities, policies, and procedures that are utilized to oversee the selection, development, implementation, and maintenance of security measures to protect electronic PHI. These are all examples of technical safeguards (ePHI).
Which of the following is a best practice for protecting PHI?
Tips to Safeguard Protected Health Information(PHI) and Prevent Breaches
- Sending PHI to mailing lists or list servers is not recommended.
- PHI should never be sent to a personal email address.
- Your University of Oregon email should NOT be forwarded automatically to a personal account.
- Be careful when using spreadsheets.
Which of the following is required by the Occupational Safety and Health Administration’s Bloodborne Pathogens Standard?
Employers are obligated to safeguard their employees against occupational exposure to infectious agents in order to comply with OSHA regulations for bloodborne pathogens (29 CFR 1910.1030) and personal protective equipment (29 CFR 1910 Subpart I).
What are the four ways to comply with the standards for bloodborne pathogens?
Standard Precautions are a set of guidelines that were developed by the Centers for Disease Control and Prevention (CDC) and will be adhered to in order to successfully prevent or reduce exposure to bloodborne infections. These include the utilization of engineering controls, work practice controls, personal protective equipment, universal precautions, and housekeeping procedures.