Which of the following are examples of precautionary measures that may be used against things that may fall from scaffolding? When you are on a scaffold, be sure that both of your feet are resting on the platform at all times, and under no circumstances should you try to increase your height by standing on a ladder, a box, or any other item.
What safety precautions are taken against objects falling from scaffolding?
A guardrail system is a vertical barrier that may be installed to prevent workers from falling off of a scaffold platform or walkway and landing on lower levels. On elevated work surfaces, guardrails are often the most prevalent kind of fall prevention that may be installed.
What type of fall protection is frequently used when using a scaffold to prevent workers from falling?
Individualized Safety Restraint Systems
When working on a suspended scaffold that is more than 10 feet above the working surface, or when working in a bucket truck or aerial lift, OSHA requires employees to wear a full-body harness, which is one component of a Personal Fall Arrest System.
Which two fall protection methods are most frequently used on scaffolds?
The following is a requirement set out by OSHA: When working on a supported scaffold, the use of either a guardrail OR a personal fall arrest system is required. Page 10. When working on a single-point or two-point suspended scaffold, BOTH a guardrail AND a personal fall arrest device are required to keep workers safe.
Which of the following is a quizlet on safe work practices when using scaffolds?
Maintain a strong grip with both feet on the scaffolding, and make sure you take the following safety precautions: Scaffolding should be inspected regularly for any potential safety issues and should be double checked to ensure it is stable. Always clean snow, ice, and other potentially hazardous debris from work surfaces. Never put too many people, pieces of equipment, or supplies on scaffolding at once.
What kind of protection, specifically against falling materials, is used?
Structures such as Guardrails and Toeboards
Toeboards and brick guards are primarily meant to keep things like bricks and toeboards from falling, whereas guardrails are primarily designed to prevent humans from falling.
Is fall protection necessary when using a scaffold?
Each worker who is on a scaffold that is more than 10 feet (3.1 meters) above a lower level is required to have fall protection provided by their employer if they are working in that location.
You must be protected when working from a scaffold, right?
The Occupational Safety and Health Administration (OSHA) mandates that employees on scaffolds that are higher than 10 feet above a lower level must be protected from falling to the lower level. When employees are on a two-point adjustable suspension scaffold, they are required to have both a guardrail system and a personal fall arrest device to prevent them from falling off.
What safety precautions must be taken when working overhead on scaffolding to stop objects from falling and harming people below?
Module 1- safety
| Question | Answer |
|---|---|
| When performing overhead work on scaffolding, what protective measures must be taken to prevent objects from falling and striking a person below? | Toe boards, debris nets, or canopies must be applied |
Choose the three applicable answers to the question “What are the three types of scaffolds?”
Terms in this set (14)
- What three types of scaffolds are there?
- Stable Scaffold.
- Scaffold for suspension.
- Airborne Lift.
- What kinds of scaffolds are prohibited from use?
- Who is responsible for deciding which fall protection technique to employ when erecting and dismantling scaffolds?
What are the three different kinds of scaffolds?
Starting from the very top. Aerial lifts, supported scaffolds, and suspended scaffolds are the three primary types of scaffolds.
OSHA test question: What is a scaffold?
It is against the law in every way. What exactly is a scaffolding? A transient raised platform that can be utilized to support personnel and/or materials. To prevent suspension trauma, the worker must reduce constriction points and move their arms and legs while they are suspended in order to keep circulation going through their body.
Which of the following are fall protection categories?
Guardrails, travel restraints, fall restrictions, fall arrests, and control zones are the fundamental forms of fall protection.
What kind of PPE is utilized to safeguard workers from objects that may fall?
Workers should wear proper footguards, safety shoes, or boots and leggings to protect their feet and legs from falling or rolling items, sharp objects, molten metal, hot surfaces, and wet slippery surfaces. These hazards include sharp objects, molten metal, hot surfaces, and wet surfaces.
What safeguards are in place to stop objects from falling?
Make use of tool lanyards to stop tools from falling to the ground. Except for the materials that are expressly necessary for the job that is being done, keep all materials at least three feet away from a leading edge. Take out anything that is loose or open in any of your pockets, especially the upper pockets of your shirt. This includes phones, pencils, and tools. Do not suspend items over the perimeter guardrails.
Which fall prevention method is best?
It is preferable to employ fall prevention systems, such as guardrails, rather than fall protection systems, such as safety nets or fall arrest devices, in most cases. This is due to the fact that fall prevention systems stop falls from happening in the first place.
What two kinds of fall protection are there?
Travel restraints and fall arrest systems are the two primary categories of fall protection. Both options need you to wear a harness that covers your entire body. You won’t be able to approach dangerously near to an unguarded edge if you’re using a travel restraint system. You will be able to reach the edge of the platform thanks to the lifeline and lanyard, but you will not be able to go over the edge.
Which of the following statements regarding the obligation of the employer to provide workers with fall protection is accurate?
YES. When it comes to the obligation of the employer to provide fall protection to workers, which of the following statements is true? The choice of a fall prevention system that an employer feels will be most effective in a given circumstance is left up to that employer.
What kind of scaffolding is most frequently used?
10. Build the Scaffolding Frames. Because it is cost-effective, simple to erect and dismantle, and offers the greatest degree of flexibility, frame scaffolding, which is sometimes referred to as constructed scaffolding, is the form of supported scaffolding that is used the most frequently.
What kind of scaffold is used the most frequently?
This eTool makes use of the frame module to specify criteria that are universal to all supported scaffolds. This is due to the fact that frame scaffolds are the most frequent form of supported scaffold.
Which of the following types of suspended scaffold is the most typical?
The most frequent kind of suspended scaffolding is a form called two-point adjustable suspension scaffolds, which are also often called swing-stage scaffolds.
How many different kinds of scaffolding are there, and how are they used?
There are five primary varieties of scaffolding that are utilized all over the world nowadays. These are components for tube and coupler (fitting) scaffolds, as well as components for prefabricated modular system scaffolds, H-frame / facade modular system scaffolds, timber scaffolds, and bamboo scaffolds (particularly in China and India).
Which of the following is necessary for using a fabricated frame scaffold safely?
General Requirements
To minimize swaying and displacement, the structural parts of constructed frame scaffolds, such as the legs, poles, posts, frames, and uprights, must be plumb and braced. At the ends, horizontally, at intervals that are no more than thirty feet from one end.
What type of fall protection is mandated by OSHA when using an aerial lift?
On the worker platform, every single worker is required to wear a complete body fall protection harness. It is imperative that the fall safety harness and lanyard prevent the worker from tumbling out of the basket and landing on the ground below. Because of this, you might require something different than the conventional lanyard that is six feet long.
Which two fall protection methods are most frequently used on scaffolds?
The following is a requirement set out by OSHA: When working on a supported scaffold, the use of either a guardrail OR a personal fall arrest system is required. Page 10. When working on a single-point or two-point suspended scaffold, BOTH a guardrail AND a personal fall arrest device are required to keep workers safe.
What are the scaffolding safety measures?
When accessing the working platform, you should always make use of the fixed ladder, the internal access stairs, or the built-in ladder. Above the platform of the scaffolding, there should always be a place to grab hold of anything. Never climb with any supplies or tools in your hands; instead, they should be individually lifted up to the scaffolding.
Which of the following is a quizlet on safe work practices when using scaffolds?
Maintain a strong grip with both feet on the scaffolding, and make sure you take the following safety precautions: Scaffolding should be inspected regularly for any potential safety issues and should be double checked to ensure it is stable. Always clean snow, ice, and other potentially hazardous debris from work surfaces. Never put too many people, pieces of equipment, or supplies on scaffolding at once.
What safety precautions can employers take when employees are atop a scaffold that is supported more than ten feet above the work area?
Every worker who is more than 10 feet (3.1 meters) above a lower level needs to have either guardrails, a personal fall arrest device, or both installed to prevent them from falling.
What sort of fall protection equipment comes to mind?
Protecting employees who are working at heights can be accomplished by the construction of scaffolding, railings, obstacles, and mobile platforms. Personal fall protection equipment such as full body harnesses, lanyards, and retractable lifelines may be employed in situations where the aforementioned safety measures would be problematic.
What do fall protection systems consist of?
The term “personal fall protection system” refers to a system (including all of its components) that is utilized by an employer to either safeguard an employee from falling or to safely arrest the employee’s fall if it does occur. Personal fall arrest systems, positioning systems, and travel restraint systems are all examples of personal fall protection systems. Other types of personal fall protection systems include travel restraint systems.
How can you prevent tools from falling off scaffolds and other elevated platforms?
Check that the load that is being raised by hand line or scaffolding is balanced, and make certain that no one is standing directly under the load that is being hoisted. It is important to keep all tools and materials away from the edges of ladders and platforms, as well as off of railings and window ledges. It is best not to put tools in your pockets since they might fall out when you bend down or grab for anything.
Which of the following is true regarding the safety of falling objects?
Which of the following statements regarding protecting yourself against falling objects is true? Working underneath moving weights is something you should try to avoid doing. Which of the following poses a risk of being struck by anything falling? Which of the following poses a risk of being hit by flying objects?
What does OSHA allow for in terms of worker protection from falling objects?
When employees are required to perform work that is less than 1.6 meters (less than 6 feet) from the edge of the roof, the employer is responsible for ensuring that each employee has a guardrail system, safety net system, travel restraint system, or personal fall arrest system to protect them from falling.
What fall prevention strategy is the most effective?
Two methods that may be utilized to prevent injuries sustained by workers as a result of falls on the job are guardrail and safety net systems. When workers are elevated more than six feet above the lower surface, the employer is required to provide them with fall protection of some kind. In areas where there are no walls that are at least 21 inches high, midrails, screens, or mesh may be put.
What fall prevention measures can an employer take to safeguard employees?
How can an employer ensure that its employees are safe from the risk of falling? Personal fall arrest devices, guardrails, and safety net systems are all options.
What is the fall protection OSHA standard?
The Occupational Safety and Health Administration (OSHA) mandates the provision of fall protection at heights of four feet in industries that are classified as general industry, five feet in shipyards, six feet in the construction sector, and eight feet in longshoring activities.
What is training in fall protection?
The purpose of fall protection training is to educate workers on the grave dangers of working at heights and to familiarize them with the proper use of fall protection equipment, such as harnesses and ladders, in order to lessen the severity of any potential accidents caused by falls from heights or to eliminate them entirely.
What are the five prerequisites for a scaffold?
Here are the highlighted rules of OSHA’s scaffolding standard:
- safety from falls.
- Height of a guardrail.
- bracing across.
- Midrails.
- Footings.
- Platforms.
- Tie-and-brace guying
- Capacity.
What kind of scaffolding is most frequently used?
10. Build the Scaffolding Frames. Because it is cost-effective, simple to erect and dismantle, and offers the greatest degree of flexibility, frame scaffolding, which is sometimes referred to as constructed scaffolding, is the form of supported scaffolding that is used the most frequently.
What kinds of bracing are there in scaffolding?
Transverse (Sectional or Ledger) (Sectional or Ledger) Bracing consists of diagonal braces that are positioned in the plane of the scaffold’s shorter dimension, which is its width. Dog-leg Bracing, also known as Zig-Zag Bracing, is characterized by diagonal braces that are set end-to-end and that alternate back and forth.